Inspire 2, Changing the Vibration Absorbing Board (Gimbal Mounting Board)

[Geoff G UK]

We had image transmission / gimbal control intermittent problems with our I2 recently and traced the fault to the gimbal. It was actually a problem with the internal switch (which registers the position of the bayonet ring) not making consistently.
I've just swapped the board (DJI part 23) and posted a video of the operation on our website.

Inspire 2 | Ibex Films | Vibration Absorbing Board Replacement

Problem solved!

 

[Veuwr Aerials]

Happy to hear!
I've had to replace the same part a handful of times on my Inspire 2 and it's quite an easy repair - definitely easier than working on a P4P