Welcome, Commercial Drone Pilots!
Join our growing community today!
Sign up

Latest activity

  • D
    I'm selling my Ouster Lidar OS1 32. It's brand new, has never been used, and is still in its unopened box. I bought it in December 2024 and thought I was going to use it for a robotics project but never did. I paid $3,500 for it and am selling it...
  • AgMike
    🚨 We’re Hiring 🚨 Lead Spray Drone Pilot – Texas We’re looking for a licensed, experienced pilot to head up a KCS crew this season! Must have your TDA applicator license and experience spraying pastures and row crops. ✅ DJI Agras experience a...
  • Eric Matyas
    Hi Everyone, This week's brand new free-to-use-with-attribution music tracks are: "THE GRUMPY MONSTER'S CASTLE" (LoFi) "TREASURE CAVE" (LoFi) "OF LEGENDS AND FABLES 3" (LoFi) "TROUBLE IN DREAMLAND" (LoFi) "CANDY FACTORY" (LoFi) You'll find...
  • adm_geomatics
    Good morning from Texas! It's been pretty stale here as of late so I just wanted to cast a lure out there and try to get some discussion going. I'd like to get some experiences and thoughts on performing integrated capture using aerial...
    • photo_lidar.png
  • Eric Matyas
    Greetings Fellow Creatives, This week's brand new Lofi tracks are: 8-BIT PERPLEXION ARCADE PUZZLER ARCADE PUZZLER_V001 BONKERS FOR ARCADES FUNKY CHIPTUNE IT’S RAINING PIXELS IT’S ALWAYS SUNNY IN THE 80’s THE ICE CREAM MAN You can listen to...
  • S
    I have been flying for two years and recently started flying FPV inside of factories but I am understanding I am grossly underprepared for this. I would love to meet pilots that are flying for industrial companies, especially those flying FPV...
  • S
    slowd reacted to MapMaker53's post in the thread Farewell Everyone with Like Like.
    Well folks... it's coming to the time that I will be riding off into the sunset. I will officially be retiring (at age 72) on June 1st after 49 years in the Environmental Services industry and will be passing down the company drone to the next...
  • MavicAir2Marc
    Technically, nothing except clipping paths are vector objects in Photoshop, it's all raster anyway. True vector objects are created in Illustrator. Place your image in Illustrator then you can add vector objects over it. That's a bit of...
  • Eric Matyas
    Hey Everyone, Another hectic week...ugh! Do you ever feel like your life is out of control? Anyhow, I managed to create some new music tracks to share with everyone. They're free to use, as always, with attribution. They are: "BLOB MONSTERS...
  • adm_geomatics
    You can't draw vector objects in Lightroom which is what linework is. Best you can do is use the brush tool. Hence why they have Photoshop.
  • MavicAir2Marc
    MavicAir2Marc reacted to MapMaker53's post in the thread Farewell Everyone with Like Like.
    Well folks... it's coming to the time that I will be riding off into the sunset. I will officially be retiring (at age 72) on June 1st after 49 years in the Environmental Services industry and will be passing down the company drone to the next...
  • J
    If you want the pedantic answer, then you cannot fly directly over people unless you have a drone meeting Category 1 -4 or a waiver. The P4RTK will never meet the OOP Categories. To be fully compliant with the rules you would have use viewing a...
  • Dave Pitman
    Dave Pitman reacted to MapMaker53's post in the thread Farewell Everyone with Like Like.
    Hey Dave. That's one drone I would like to get someday (if my retirement budget can afford it), but only after the FAA starts allowing BVLOS without the need for a VO. (Then again, I could always join a local club for that.) We'll see. Thanks...
  • MapMaker53
    MapMaker53 replied to the thread Farewell Everyone.
    Hey Dave. That's one drone I would like to get someday (if my retirement budget can afford it), but only after the FAA starts allowing BVLOS without the need for a VO. (Then again, I could always join a local club for that.) We'll see. Thanks...
  • Eric Matyas
    Thanks for all you do, I can always find a tune to go with my clips !!! ~Falconeer
  • F
    Thanks for all you do, I can always find a tune to go with my clips !!! ~Falconeer
  • F
    Happy April Everyone, I have a bunch of cool new LoFi music tracks to share on my Action 3 page. They are: WILD WEST COAST RACING 9_LoFi FUNKY RUNNIN’_LoFi WILD WEST COAST RACING 8_LoFi TRASH CAN WARRIORS_LoFi WILD WEST COAST RACING 7_LoFi...
  • Eric Matyas
    Happy April Everyone, I have a bunch of cool new LoFi music tracks to share on my Action 3 page. They are: WILD WEST COAST RACING 9_LoFi FUNKY RUNNIN’_LoFi WILD WEST COAST RACING 8_LoFi TRASH CAN WARRIORS_LoFi WILD WEST COAST RACING 7_LoFi...
  • adm_geomatics
    If it is just foot traffic "sparsely populated" then no worries if you are just following traditional flight lines, but if there is a large group of people and your transects are tightly spaced and will cross them several times then I would wait...
  • S
    I'm not clear on what is and is not allowed for a mapping flight that might pass over people. I've been asked to use my P4 RTK to photograph and topo a 10 acre site that includes a hiking trailhead and parking lot. There may or not be people...
  • WhiskeyRomeo
    WhiskeyRomeo reacted to MapMaker53's post in the thread Farewell Everyone with Like Like.
    Well folks... it's coming to the time that I will be riding off into the sunset. I will officially be retiring (at age 72) on June 1st after 49 years in the Environmental Services industry and will be passing down the company drone to the next...
  • Dave Pitman
    Dave Pitman reacted to GFields's post in the thread Farewell Everyone with Like Like.
    Retiring doesn't mean that you have to leave the forum. Hang around and offer your expertise.
  • Dave Pitman
    Dave Pitman replied to the thread Farewell Everyone.
    Hey Bill. Maybe get yourself an Avata 2 and have even more fun flying. Most of all, Enjoy your retirement!
  • Dave Pitman
    https://commercialdronepilots.com/threads/like-new-matrice-300-rtk.4784/

Members online

No members online now.

Forum statistics

Threads
4,448
Messages
38,375
Members
6,310
Latest member
dronerobotics