Auto takeoff and Landing icons not showing up on my fly screen.

[airdonkey]

I'm new, so don't give me the benefit of the doubt that I know what I'm doing and have already checked the basics!
But I know enough to know that on my fly screen (on my Phantom 4 RTK) I should see an auto-takeoff and auto-landing icons. I see neither.
Strange thing is, I did have the auto-landing button before, but now it too is gone.
On the "Aircraft module self-check" screen, Flight control/Power/Battery/RC/Vision all say "OK". My "D-RTK2 Mobile Station" does say disconnected but I wouldn't think I would need that for this...
And no, the icons don't appear after I take-off.
Also, it does seem like the RTH button on the controller works.

 

[airdonkey]

I posted this on the phantom site as well...

My current experiences and research are telling me that the auto-takeoff and landing icons do not appear on the GS RTK app screen. I know the RTH icon WAS there when I first turned on the unit. I think it subsequently disappeared after I did the firmware update. I'm also basing this off watching a couple of unrelated utube videos that were using the same RTK equipment and I saw that their displays also did not show those icons...however, I wouldn't take this as the "settled science" on this matter.