Flir Vue Pro R

[Outta Control]

I guess there are no plain simple answers to my questions.
Just thought there might be some instructional videos I can watch to help understand the thermal camera better.

I tried to provide with straight answer but it seem you do not want to accept it.

You can look at the FLIR DELTA series on YT.

 

[Outta Control]

What radiometric thermal camera do you use?

I have a VUE Pro (non-radiometric) 336x256, 13mm, 30Hz and a DUO Pro R (Radiomentric) 640x512, 13mm, 30Hz.

 

[NEPA]

I guess I'm just going to have to find and take some radiometry classes

 

[Outta Control]

Sure ITC is located on NH and travel to conduct classes. Just make sure you take the sUAS version not the standard version.

 

[NEPA]

I'm sorry if I came off a bit rude and unaccepting. just thought maybe there was a simpler way of doing it .with today's technology there should be programs to handle calculations

 

[NEPA]

Let me start back at the beginning with a question. I want to get into radiometry with a drone or thermal scanning with a drone what equipment and training do you suggest

 

[Outta Control]

Hi NEPA, welcome.

If you want to learn about Radiometeric reading from a thermal camera, it is highly recommended to take the ITC sUAS Thermography course.

If you want to learn about thermal (qualitative) scanning, you can check YouTube sites or attend Drone University USA's Thermography course in CA.
As a side note, you can learn it for yourself with an inexpensive thermal camera and gain some insight from certified fellas like me. There are other thermographers on this forum to help.

 

[NEPA]

Thank you for your advice

 

[LUIS MARTINEZ]

As I said I'm new at this not sure what measurements you speak of but why not?

If you are going to be using thermal in any capacity you should take a level 1 course. No substitute for proper training.

 

[Daniel Czerwinski]

Do any of you guys have this thermal camera?
Want to attach it to the intelligent uas system. Anybody

Do any of you guys have this thermal camera?
Want to attach it to the intelligent uas system. Anybody have or use that?

Do any of you guys have this thermal camera?
Want to attach it to the intelligent uas system. Anybody have or use that?

Good morning gentlemen.

Do any of you guys have this thermal camera?
Want to attach it to the intelligent uas system. Anybody have or use that?

Good morning gentlemen. I would suggest visiting the website Infrared Training Center E-LearnIR Portal. I got a lot of basic info from that. I do think though that to boost our credibility we need certification. An example is level one FLIR UAS certification. This will teach you about how to do IR correctly with your drone as well as what color palates to use and reports. Its pricey, but if you have to go to deposition you can really be an asset to your client. I have an I2 but decided to get a Matrice 200 and the new XT2 camera. The price is a kicker $19,000, but it will be able to handle roof inspections, AC inspections, solar panels etc. If you plan on doing power line inspection you will need the Matrice 210 RTK. Bottom line, get certified.

Do any of you guys have this thermal camera?
Want to attach it to the intelligent uas system. Anybody have or use that?

Do any of you guys have this thermal camera?
Want to attach it to the intelligent uas system. Anybody have or use that?

Do any of you guys have this thermal camera?
Want to attach it to the intelligent uas system. Anybody have or use that?

 

[Outta Control]

... I have an I2 but decided to get a Matrice 200 and the new XT2 camera. The price is a kicker $19,000, but it will be able to handle roof inspections, AC inspections, solar panels etc. If you plan on doing power line inspection you will need the Matrice 210 RTK. Bottom line, get certified.

What is $19K, the Matrice with XT2, or just the XT2?

 

[NEPA]

The matrice 210 rtk. Why is that specific aircraft needed for power line inspection?

 

[CrescentAI]

sUAS.com VuIR Touch P4 for Phantom 4/Pro - The smart Thermal Vision System for your Drone
I have a p4p pro that the intelligent uas gimbal is going to attach to..
I'm new with a thermal camera are there any tips you can give me, or info on post processing programs?

Buy tons of High capacity rechargeable 9V Batteries, you will go through them quickly. I ended up graduating to a Inspire 1 with the XT.

 

[TreeLineView]

I to have an sUAS.Com system for my I2. I to am in the process of moving to the XT and either an M100 or I1 V2. Fell free to IM me. I can give you plenty of input on them and their solution.. Also will give you a great deal on my current setup. sUAS.com gimbra with Vue Pros 336x 256 13mm 30 htz. John