Log showing RTK Fix\Float?

[SIr Veyor]

Hi All,

Where would one find the log or report showing the FIX\FLOAT times for a flight? There's some areas where the RTK doesn't stay fixed during the whole flight. Poor radio\cel signals.

It shows up during the drones' return flight, but nobody seems to know where to look for the log of that afterwards. It can be used to determine if it should be reflown while in the field and to show the office\client QA\QC that the drone held fix the entire time.

 

[Dave Pitman]

You can check the .mrk file. Column 13 indicates the correction status at the time of each capture.

Column 13: RTK status, 0-no positioning, 16-single point positioning mode, 34-RTK float
solution, 50-RTK fixed solution.

 

[jaja6009]

If you are using a Matrice 4 series come on over to the sister Matrice Pilots forum, link can be found below.

For your question I copied and pasted information from one of our members.



Option One:
1. Main Controller Dashboard
2. Select "Flight Route"
3. Select the Map, your choice
4. Select elipses on the left floating menu
5. Select "Routes" under the "Ground Station" section of the menu. This will open up the right side slider menu of all your maps in a list. Each with the option of "View Task Quality Report."

Option Two:
1. Main Controller Dashboard
2. Select "Enter Camera View"
3. Select "X" top right to close the "Preflight Check" window
4. Select elipses on the left floating menu
5. Select "Routes" under the "Ground Station" section of the menu. This will open up the right side slider menu of all your maps in a list. Each with the option of "View Task Quality Report."