Welcome, Commercial Drone Pilots!
Join our growing community today!
Sign up

Source for DJI screws - Flat head w Allen socket

dougcjohn

Well-Known Member
Joined
Jan 17, 2018
Messages
468
Reaction score
160
Age
63
Anyone know of a good source for various DJI Flat head screws: OEM or 3rd Party.
They use multiple specialty sized and different diameter heads in same screw size.
Most are using an Allen Head socket, 2mm, 2.5mm, 3mm Allen.
I’ve found close in sizes on flat heads in 3rd Party, but they’re Phillip.

Larger platform: M600Pro, S1000, etc.
sizes primarily seeking:
M3*4.5, M3*5.5, M3*6.5 (6.7), M3*7.5 (7.8).
Small head & normal sized head.
Similar in M2.5 sizes.
 

dougcjohn

Well-Known Member
Joined
Jan 17, 2018
Messages
468
Reaction score
160
Age
63
I googled your title and found lots.
Prior to posting, I googled DJI Screws, in various strings. Found majority for Mavic, M2P, Phantom screw kits or 3rd Party screws mostly Button, allen barrel heads or flat taper heads; many came close but with Phillips head. The Mavic are mostly too small, the Phantom are mostly phillips heads. Many of the 3rd Party Button or Allen barrel are too big in Head Diameter to fit down into some components recessed mounts. Example, the A3 Pro antenna Masts require small heads.

Closest I've found is on the DJI Store site; M600 Screw Kit, may just grab a few of these... several in kit not needed but probably best option. Buy Matrice 600 Series Screw Kit - DJI Store

If you come across one handy... toss it over with DJI OEM screws in the M3 size series.
Much appreciated.
 
  • Like
Reactions: dirkclod

dirkclod

Moderator
Staff member
Joined
Dec 20, 2017
Messages
941
Reaction score
419
Age
66
Location
Amory, MS . USA
Prior to posting, I googled DJI Screws, in various strings. Found majority for Mavic, M2P, Phantom screw kits or 3rd Party screws mostly Button, allen barrel heads or flat taper heads; many came close but with Phillips head. The Mavic are mostly too small, the Phantom are mostly phillips heads. Many of the 3rd Party Button or Allen barrel are too big in Head Diameter to fit down into some components recessed mounts. Example, the A3 Pro antenna Masts require small heads.

Closest I've found is on the DJI Store site; M600 Screw Kit, may just grab a few of these... several in kit not needed but probably best option. Buy Matrice 600 Series Screw Kit - DJI Store

If you come across one handy... toss it over with DJI OEM screws in the M3 size series.
Much appreciated.
Was all I could find and did look. The only other place is a vender
we have and at the moment not sure he is in this forum but would
rreach out to him DJI Drone Service - Your Drone Repair Shop Sorry but that’s all I got ?‍♂️
He is also @DDS in our other forums.
Good luck.
 

Fred Garvin

Well-Known Member
Joined
Jan 3, 2019
Messages
391
Reaction score
395
Location
DFW Metroplex
Website
orbisdroneservices.com
You might try Yuneec Skins over on the Yuneec Forum. Between them and the Mod WTFDProject, they've managed to provide support for the Typhoons at a level far beyond even the manufacturer. (Yuneec should be paying these guys)

I know you're looking for DJI, but these manufacturers source commonly available hardware for things like this, rather than manufacture a specific "one-off" screw.
 
  • Like
Reactions: dougcjohn

dougcjohn

Well-Known Member
Joined
Jan 17, 2018
Messages
468
Reaction score
160
Age
63
You might try Yuneec Skins over on the Yuneec Forum. Between them and the Mod WTFDProject, they've managed to provide support for the Typhoons at a level far beyond even the manufacturer. (Yuneec should be paying these guys)

I know you're looking for DJI, but these manufacturers source commonly available hardware for things like this, rather than manufacture a specific "one-off" screw.
Be worth a check, several Yuneec fasteners have a similar shape. I'll need to break out the H520 and look it over to compare.
 
  • Like
Reactions: Fred Garvin

dougcjohn

Well-Known Member
Joined
Jan 17, 2018
Messages
468
Reaction score
160
Age
63
Was all I could find and did look. The only other place is a vender
we have and at the moment not sure he is in this forum but would
rreach out to him DJI Drone Service - Your Drone Repair Shop Sorry but that’s all I got ?‍♂️
He is also @DDS in our other forums.
Good luck.
Thanks, never heard of the site but looks like a good source for multiple needs.
 
  • Like
Reactions: dirkclod

dirkclod

Moderator
Staff member
Joined
Dec 20, 2017
Messages
941
Reaction score
419
Age
66
Location
Amory, MS . USA
Thanks, never heard of the site but looks like a good source for multiple needs.
They are and are venders in seversal of our forums. I use them and
highly recommend them for repairs. Have used them several times
as well as 1 of our Admins. At any rate he might can advise you on
what you seek.
 
  • Like
Reactions: dougcjohn

New Threads

Members online

No members online now.

Forum statistics

Threads
3,423
Messages
32,019
Members
4,823
Latest member
SandCop